Tiny House design using Boxes.Py

From Sensors in Schools
Revision as of 00:51, 2 October 2023 by EdmondLascaris (talk | contribs) (Created page with "= Introduction = * The aim of this lesson is to design a Tiny House (400mm cubed) using festi.info/boxes.py * The house will be created using laser cut Birch wood [https://plyco.com.au/collections/birch Birch laserply - Plyco] * The plywood pieces are glued together with PVA glue and then painted to make the wood weather proof.")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Introduction

  • The aim of this lesson is to design a Tiny House (400mm cubed) using festi.info/boxes.py
  • The house will be created using laser cut Birch wood Birch laserply - Plyco
  • The plywood pieces are glued together with PVA glue and then painted to make the wood weather proof.
Retrieved from "http://www.waterwaysinwhittlesea.org/index.php?title=Tiny_House_design_using_Boxes.Py&oldid=8992"