PyCom Setup

From Sensors in Schools
Revision as of 07:32, 7 April 2022 by Bobblybook (talk | contribs) (Created page with "1. Board soldering (TODO: Schematic/images) 2. Firmware updater * Expansionboard/Pygate: https://docs.pycom.io/updatefirmware/expansionboard/ * LoPy: https://docs.pycom.io/updatefirmware/device/ 3. Install Atom + Pymakr plugin. Pymakr and firmware install tools only work on x86 processors, so ARM devices (eg. Raspberry pi) will not work for this step. * For Windows, Visual Studio C++ 2019 is required (2022 currently isn't supported): Downloads & Resources * For li...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

1. Board soldering (TODO: Schematic/images)

2. Firmware updater

3. Install Atom + Pymakr plugin. Pymakr and firmware install tools only work on x86 processors, so ARM devices (eg. Raspberry pi) will not work for this step.

  • For Windows, Visual Studio C++ 2019 is required (2022 currently isn't supported): Downloads & Resources
  • For linux: install node v16 (v17 does NOT work currently) and 'make' tools + toolchain.


4. Set up Pygate gateway:

Retrieved from "http://www.waterwaysinwhittlesea.org/index.php?title=PyCom_Setup&oldid=3953"