First Boot

From Sensors in Schools

Revision as of 07:17, 4 April 2023 by Jeremy (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Ensure all cables are plugged and then LASTLY the power cable to Raspberry Pi

After your pi has restarted (As many times as it needs to) you will see a setup wizard or if you used the settings menu then you will see the desktop

The setup wizard

The desktop

Follow the setup wizard to complete installation (Skip this step if you were taken to the desktop)

If prompted follow further instructions to finish setting up your Raspberry Pi

Open the raspberry pi menu then select Accessories then Raspberry Pi configuration

Go through the individual tabs changing any settings to suit your needs

Change the default username, password, and the hostname to ones you will remember. Also change the Wi-Fi settings to the ones matching your area

In the interface tab leave all off except for SSH and VNC because they will be used for communicating with the raspberry pi

Retrieved from "http://www.waterwaysinwhittlesea.org/index.php?title=First_Boot&oldid=6957"