Icom ID-52 Repeater Experiments: Difference between revisions

From Sensors in Schools
Jump to navigation Jump to search
Line 38: Line 38:
* Enter characters for name
* Enter characters for name
* Press '''QUICK''' to exit
* Press '''QUICK''' to exit
* Select '''<<Write>> to save changes.


= Eltham, Kangaroo Ground =
= Eltham, Kangaroo Ground =

Revision as of 03:58, 19 October 2023

Introduction

Repeater Book App

ICOM ID-52D Add Repeater - Instructions

  • ICOM ID-52D Add Repeater
  • Get into VFO Mode
  • Use the top knob to change the freqency.
  • To alternate between higher and lower frequencies click the VFO button
  • Click on the Menu button
  • Select Set using the middle button
  • Select DUO/TONE
  • Select Repeater Tone
  • Use knob to change tone (e.g. 91.5)
  • Then select TSQL Freq
  • Click on VFO button to escape from Menu


  • Click on QUICK button
  • Select DUP - Duplex
  • Select DUP-
  • Select TONE

Add to Memory

  • Hold down MR key
  • Select WRITE To NEW CH new channel
  • Find blank channel
  • Push middle button
  • Click YES to write to new channel.

Edit name of Memory Channel

  • Find Memory
  • Hold down MR to Edit
  • Select Edit with the middle button
  • Click QUICK button
  • Select NAME
  • Enter characters for name
  • Press QUICK to exit
  • Select <<Write>> to save changes.

Eltham, Kangaroo Ground

  • VK3RMH
  • 70cm
  • 438.32500
  • 433.32500
  • -5.0 MHz
  • FM
  • 91.5 Hz

Melbourne, CBD East

  • VK3RCC
  • 438.02500
  • -5.0 MHz
  • FM
  • 91.5 Hz
Retrieved from "http://www.waterwaysinwhittlesea.org/index.php?title=Icom_ID-52_Repeater_Experiments&oldid=9496"