BirdNET-Pi Bencheng: Difference between revisions
Jump to navigation
Jump to search
| Line 26: | Line 26: | ||
* Step 4: Choose storage space | * Step 4: Choose storage space | ||
(If nothing is available it’s because the sim wasn’t recognized. Unplug it and | (If nothing is available it’s because the sim wasn’t recognized. Unplug it and insert again.) | ||
[[File:Rasp_Step_4.png | 450px]] | [[File:Rasp_Step_4.png | 450px]] | ||
* Step 5: Advanced Options | |||
Click the gear icon at the right bottom of the interface. | |||
[[File:Rasp_Step_5.png | 450px]] | |||
- Step 5.1 Set username and password | |||
- Step 5.2 Configure wireless LAN | |||
- Step 5.3 Set locale settings | |||
= Another section = | = Another section = | ||
Revision as of 03:12, 27 July 2023
Introduction
For help just search for mediawiki formatting
Configuration of Raspberry Pi
To include photo - just click on Upload file on the left Upload file / image Then copy file name and place here using following format...
- Step 1: Download the Raspberry Pi Imager
Download link: https://www.raspberrypi.com/software/
- Step 2: Insert the sim card into the adapter and plug it into the computer.
- Step 3: Choose Raspberry Pi OS Lite(64-bit) as the Operating System.
- Step 4: Choose storage space
(If nothing is available it’s because the sim wasn’t recognized. Unplug it and insert again.)
- Step 5: Advanced Options
Click the gear icon at the right bottom of the interface.
- Step 5.1 Set username and password
- Step 5.2 Configure wireless LAN
- Step 5.3 Set locale settings
Another section
tar -xvf arduino-1.8.19-linuxarm.tar.xz
adad
fa
f
sd
fs
adf
asd
f
sdf