Off-grid Solar PV Panel project

Building a small scale Solar PV system using an Arduino

• Arduino fan motor control

Arduino IDE Installation and Configuration on a Raspberry Pi

Arduino LED Blink Program

• Program lights up Arduino UNO on-board LED connected to pin 13 for 1 second.

/*
  Blink

  Turns an LED on for one second, then off for one second, repeatedly.

*/

// the setup function runs once when you press reset or power the board

void setup() {
  // initialize digital pin LED_BUILTIN as an output.
  pinMode(13, OUTPUT);
}

// the loop function runs over and over again forever
void loop() {
  digitalWrite(13, HIGH);   // turn the LED on (HIGH is the voltage level) = 1 = 5V supply
  delay(1000);                       // wait for 1 second
  digitalWrite(13, LOW);    // turn the LED off by making the voltage LOW = 0 = 0V supply
  delay(1000);                       // wait for 1 second
}

Arduino UNO - Safety

• Wear eye protection.
• Always get a teacher to inspect your circuit before powering up.
• Wear cotton shirts and pants and closed shoes.
• Even low voltages can cause burns because wires can heat up if shorted.

Arduino UNO - Building a LED Blink Circuit on a Breadboard

• Build an external LED Blink Circuit for the Arduino UNO.

Arduino UNO - Building a Mini-Solar PV Circuit

• Demonstration on how to build a small PV circuit that charges a battery on an Arduino UNO.
• The circuit incorporates a Voltage Divider circuit.
• Click on Image below to download and watch video.

Raspberry Pi - Python Introductory Lesson

• Install software to help program in Python
• Explore some simple python coding and learn about indentation to delineate code blocks

Raspberry Pi and Arduino Serial Communication

• Write code for the Arduino UNO to send data to the Raspberry pi using Serial communication.
• Write code in Python on the Raspberry Pi to receive data from the Arduino UNO using Serial communication.
• Raspberry Pi requires the installation of:
  • sudo apt install python3-pip - pip to install python packages
  • python3 -m pip install pyserial - pySerial Library

Python code for Raspberry Pi to receive serial communication from the Arduino UNO

import serial

if __name__ == '__main__':
    ser = serial.Serial('/dev/ttyUSB0', 9600, timeout=1)
    ser.reset_input_buffer()
    
    while True:
        if ser.in_waiting > 0:
            line = ser.readline().decode('utf-8').rstrip()
            print(line)