Arduino Uno Example Projects for Students: Difference between revisions
Jump to navigation
Jump to search
(Created page with "= Solar Distillation - Water Purification project = == Fritzing Circuit Diagram == * Parts required: ** Relay - Pololu Basic SPDT Relay Carrier with 5VDC Relay (Core Electronics) [https://core-electronics.com.au/pololu-basic-spdt-relay-carrier-with-5vdc-relay-assembled.html? Relay] 900px") |
No edit summary |
||
| Line 3: | Line 3: | ||
== Fritzing Circuit Diagram == | == Fritzing Circuit Diagram == | ||
* Parts required: | * Parts required: | ||
** Relay - Pololu Basic SPDT Relay Carrier with 5VDC Relay | ** Relay - Pololu Basic SPDT Relay Carrier with 5VDC to control pump. Relay controlled using pin 12 on Arduino. [https://core-electronics.com.au/pololu-basic-spdt-relay-carrier-with-5vdc-relay-assembled.html? Core Electronics] | ||
** Peristaltic pump - Peristaltic Liquid Pump with Silicone Tubing - 5V to 6V DC Power [https://core-electronics.com.au/peristaltic-liquid-pump-with-silicone-tubing-5v-to-6v-dc-power.html Core Electronics] | |||
** LED - to indicate status of pump. LED controlled using pin 13 on Arduino. | |||
** 5V supply - using a Raspberry Pi 3+ Power Supply [https://core-electronics.com.au/raspberry-pi-3-power-supply.html Core Electronics] | |||
** 5 Amp Fuse - 5A M205 Quick Blow Fuse [https://www.jaycar.com.au/5a-m205-quick-blow-fuse/p/SF2166? Jaycar] | |||
** Fuse Holder - Heavy Duty 20A 3AG Inline Fuse Holder (20 Amps, 3AG indicates thickness of leads) [https://www.jaycar.com.au/heavy-duty-20a-3ag-inline-fuse-holder/p/SZ2016? Jaycar] | |||
[[File:Screenshot 2023-05-04 at 4.47.19 am.png | 900px]] | [[File:Screenshot 2023-05-04 at 4.47.19 am.png | 900px]] | ||
Revision as of 19:00, 3 May 2023
Solar Distillation - Water Purification project
Fritzing Circuit Diagram
- Parts required:
- Relay - Pololu Basic SPDT Relay Carrier with 5VDC to control pump. Relay controlled using pin 12 on Arduino. Core Electronics
- Peristaltic pump - Peristaltic Liquid Pump with Silicone Tubing - 5V to 6V DC Power Core Electronics
- LED - to indicate status of pump. LED controlled using pin 13 on Arduino.
- 5V supply - using a Raspberry Pi 3+ Power Supply Core Electronics
- 5 Amp Fuse - 5A M205 Quick Blow Fuse Jaycar
- Fuse Holder - Heavy Duty 20A 3AG Inline Fuse Holder (20 Amps, 3AG indicates thickness of leads) Jaycar
