BirdNET-Pi to Monitor Bird Calls: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 73: | Line 73: | ||
[[File:Screen Shot 2023-03-02 at 11.13.49 am.png | 900px]] | [[File:Screen Shot 2023-03-02 at 11.13.49 am.png | 900px]] | ||
* You will also configure the system's connection to your WiFi by | * You will also configure the system's connection to your WiFi by entering the network's name (SSID) and the password used to connect to that WiFi. | ||
entering the network's name (SSID) and the password used to connect to that WiFi. | * Adjust the locale settings for your Time zone and Keyboard layout. | ||
[[File:Screen Shot 2023-03-02 at 11.14.55 am.png | 900px]] | [[File:Screen Shot 2023-03-02 at 11.14.55 am.png | 900px]] | ||
* | * '''Save''' the settings and click "WRITE" to write the image to the SD card | ||
[[File:Screen Shot 2023-03-02 at 11.15.07 am.png | 900px]] | [[File:Screen Shot 2023-03-02 at 11.15.07 am.png | 900px]] | ||
Revision as of 01:03, 2 March 2023
BirdNET-Pi Lesson
| Lesson number | Step by step instructions | Dropbox Video link | Teacher resources |
|---|---|---|---|
| Lesson 2a | #Learn how to build a Raspberry Pi | 
|
Raspberry Pi Beginner's Guide pdf |
| Lesson 2b | #Learn about the platypus in the Plenty River | 
|
Platypus release video mp4 |
| Lesson 2c | #Installation of Scratch on the Raspberry Pi | 
|
|
| Lesson 2d | #Introduction to the Scratch programming language | 
|
Scratch coding script for dog lesson Scratch .sb file |
Installation Guide for BirdNET-Pi
- Download and install the Raspberry Pi Imaging software.
- The software is available from https://www.raspberrypi.com/software
- Insert a microSD card in the computer with the Raspberry Pi Imaging software.
- The size of the microSD card needs to be 16 GB.
- Open the Raspberry Pi Imager and click CHOOSE OS to select the operating system for BirdNET-Pi.
- Click Raspberry Pi OS (other) Other Raspberry Pi OS based images
- Scroll down the list and select "Raspberry Pi OS Lite (64-bit)"
- Next, click "CHOOSE STORAGE" to select the SD card the BirdNET-Pi will use
- Choose the SD card onto which we will write the RaspiOS-Lite (64-bit) operating system
- Now, click the gear icon in the bottom right to open the "Advanced options" menu
- Answer Yes - to fill in WiFi details
- Set the hostname you would like this BirdNET-Pi to use to be reached.
- For example, to have multiple BirdNET-Pis on the same network, you might want to give them each a different hostname.
- In this example, the installation will be reachable at "http://birdnetpi1.local", since that is the hostname that is set during this step.
- You should also "Enable SSH" and select to "Use password authentication"
- When you scroll down, you will set the option to "Set username and password."
- This example creates a new user called pi.
- You will also configure the system's connection to your WiFi by entering the network's name (SSID) and the password used to connect to that WiFi.
- Adjust the locale settings for your Time zone and Keyboard layout.
- Save the settings and click "WRITE" to write the image to the SD card
- Select "YES" and enter to allow your host system (the computer you're on now) to write the SD card.
- Wait while the image is written to the card and the checksums verified
- The writing and verification process takes approx 5-10 minutes.
- When the SD card is ready, you'll be notified that is ok to remove it from your computer
- At this point, you will put the SD card into the Raspberry Pi and will allow it a few minutes to
boot up. After a few minutes, you can move on to the next step.