Project rubbish picker robot: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 13: | Line 13: | ||
=Design= | =Design= | ||
Using Fusion 360 we made the chassis for the robot which would hold the motors, Bluetooth modules and Arduino etc. It will be (LASER/CNC)? cut out of plastic. The walls of the project will be hot-glued to each other. The microprocessor will be screwed to the chassis and the Bluetooth module will be blue tacked. | Using Fusion 360 we made the chassis for the robot which would hold the motors, Bluetooth modules and Arduino etc. It will be (LASER/CNC)? cut out of plastic. The walls of the project will be hot-glued to each other. The microprocessor (Arduino) will be screwed to the chassis and the Bluetooth module will be blue tacked. | ||
Revision as of 06:50, 22 November 2022
Parts used
- Arduino UNO R3 x2
OR 
- L298N DC Motor Driver
- Motor with T Gearbox
- Bluetooth modules, the one on the left is 4.0, the on the right is Bluetooth 2.0. The last one is a HC-05 module - A HC-06 module is different because it is only a slave device whereas the HC-05 can be a host or slave device.
Design
Using Fusion 360 we made the chassis for the robot which would hold the motors, Bluetooth modules and Arduino etc. It will be (LASER/CNC)? cut out of plastic. The walls of the project will be hot-glued to each other. The microprocessor (Arduino) will be screwed to the chassis and the Bluetooth module will be blue tacked.