Tiny House design using Boxes.Py: Difference between revisions
Jump to navigation
Jump to search
(Created page with "= Introduction = * The aim of this lesson is to design a Tiny House (400mm cubed) using festi.info/boxes.py * The house will be created using laser cut Birch wood [https://plyco.com.au/collections/birch Birch laserply - Plyco] * The plywood pieces are glued together with PVA glue and then painted to make the wood weather proof.") |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 3: | Line 3: | ||
* The house will be created using laser cut Birch wood [https://plyco.com.au/collections/birch Birch laserply - Plyco] | * The house will be created using laser cut Birch wood [https://plyco.com.au/collections/birch Birch laserply - Plyco] | ||
* The plywood pieces are glued together with PVA glue and then painted to make the wood weather proof. | * The plywood pieces are glued together with PVA glue and then painted to make the wood weather proof. | ||
= Boxes.py = | |||
* An open box was selected from the options in the web site. | |||
* The box was 400mm cubed. | |||
* Follow the specifications shown in the screen captures below. | |||
[[File:Screenshot 2023-09-14 at 4.07.44 am.png | 900px]] | |||
[[File:Screenshot 2023-09-14 at 4.07.49 am.png | 900px]] | |||
* Download the SVG file | |||
* The '''Burn''' factor needs to be modified to obtain a good / tight fit for the finger joints. | |||
* In this instance the best '''Burn factor''' was determined to be '''0.08'''. | |||
* Burn factor is also known as Kerf in other software such as '''MakerCase''' | |||
* The Burn factor will also change depending on what wood is used. | |||
== Dropbox link to Tiny House == | |||
[https://www.dropbox.com/scl/fi/emnjtjks46kkjrqook1qo/ABox-3-Burn0.08-400mm-13Sep2023.svg?rlkey=ewqs4dsm3g8xz1oysy1snk6o7&dl=0 Dropbox link to Tiny House Open Box] | |||
Latest revision as of 01:02, 2 October 2023
Introduction
- The aim of this lesson is to design a Tiny House (400mm cubed) using festi.info/boxes.py
- The house will be created using laser cut Birch wood Birch laserply - Plyco
- The plywood pieces are glued together with PVA glue and then painted to make the wood weather proof.
Boxes.py
- An open box was selected from the options in the web site.
- The box was 400mm cubed.
- Follow the specifications shown in the screen captures below.
- Download the SVG file
- The Burn factor needs to be modified to obtain a good / tight fit for the finger joints.
- In this instance the best Burn factor was determined to be 0.08.
- Burn factor is also known as Kerf in other software such as MakerCase
- The Burn factor will also change depending on what wood is used.
