View source for Tiny House design using Boxes.Py

= Introduction =
* The aim of this lesson is to design a Tiny House (400mm cubed) using festi.info/boxes.py
* The house will be created using laser cut Birch wood [https://plyco.com.au/collections/birch Birch laserply - Plyco]
* The plywood pieces are glued together with PVA glue and then painted to make the wood weather proof.

= Boxes.py =
* An open box was selected from the options in the web site.
* The box was 400mm cubed.
* Follow the specifications shown in the screen captures below.

[[File:Screenshot 2023-09-14 at 4.07.44 am.png | 900px]]

[[File:Screenshot 2023-09-14 at 4.07.49 am.png | 900px]]

* Download the SVG file
* The '''Burn''' factor needs to be modified to obtain a good / tight fit for the finger joints.
* In this instance the best '''Burn factor''' was determined to be '''0.08'''.
* Burn factor is also known as Kerf in other software such as '''MakerCase'''
* The Burn factor will also change depending on what wood is used.

== Dropbox link to Tiny House ==
[https://www.dropbox.com/scl/fi/emnjtjks46kkjrqook1qo/ABox-3-Burn0.08-400mm-13Sep2023.svg?rlkey=ewqs4dsm3g8xz1oysy1snk6o7&dl=0 Dropbox link to Tiny House Open Box]